1. Trendelenburg position reversed Trendelenburg position and lateral tilt in the left or right direction are regulated by one single Hand Wheel. The movements of the back section and the leg section are controlled by Hand Wheel. For directions for use please see the label attached to the crank sleeve.

2. The kidney bridge is controlled by a crank Handle situated at the center

3. Both the ascending and descending movements of the table top are controlled by the oil pump. When the products leave the factory, the oil in the oil pump has been pumped into the pail, so the oil pump can not ascend. The consumers must loosen the cover of the filling aperture at the top of the oil pump and try to use the oil in the pail to refill the oil pump through the filling aperture slowly. By pressing down to its limit, the tabletop will begin to descend slowly and gently.

4. The base of the table is mounted on ball-bearing castors and controlled by the floor brake so that the table can be freely moved or stabilized at any desired position. When the pedal is pressed down gently, the table can be pushed easily, and when the same is pressed down again, the base will be set stably on the floor.